A 14.5 oz lagging canvas that is easily installed over pipe insulation to conceal the fibers that may be considered a health concern if airborne.
The lagging canvas is made out of fiberglass woven thread that is embedded with an inorganic rewettable coating. Once moistened, the rewettable coating becomes sticky and hardens once it dries.
This product is tested to withstand a maximum operating temperature of 1000F.
SPECIFICATIONS: Meets Military Specification: MIL-C-20079H Type 1 Class 4
PRODUCT DIMENSIONS: Per Yard: 60" wide x 3ft long Per Box (5 yards): 60" wide x 15ft long
INSTRUCTIONS: - First, measure the outside circumference of the pipe to be concealed to figure out how many yards of material to order. We recommend that the 60" length be used to cut 3ft long strips rather than have 60" long strips which are harder to install (we recommend a large overlap of at least 6" depending on pipe size.)
- Dip the Rewettable canvas in water (bathtub, pail, etc) and allow excess water to drip off before application.
- Wrap the canvas around the pipe with the seam on the side.
- After the canvas dries, it can be painted with CP-11 or another type of paint, or left plain.
**Another method is wrapping the canvas around the pipe dry (rather than wet), and then wetting the canvas with a spray bottle.
WARNING: Asbestos is a health hazard. Proper precautions should be taken at all times when working with or near asbestos containing materials including wearing a respirator and properly sealing off the work area from other parts of the building.