Rubber Tubing Insulation (1/2" Thick)

Manufacturer: K-Flex Insulation

SKU: 0505

UOM:: PER 3FT SECTION

Availability:: STOCK ITEM

Price: $2.25

$2.25 3/8"C
$2.65 5/8"C (3/8"I)
$3.32 3/4"C
$2.96 7/8"C (1/2"I)
$3.64 1-1/8"C (3/4"I)
$3.64 1-3/8"C (1"I)
$4.23 1-5/8"C (1-1/4"I)
$5.12 1-7/8"C (1-1/2"I)
$5.51 2-1/8"C
$6.87 2-3/8"C (2"I)
$7.67 2-5/8"C
$9.07 3-1/8"C

K-FLEX LS is used to retard heat gain and prevent condensation or frost formation on refrigerant lines, cold water plumbing, and chilled water systems. It also retards heat loss for hot water plumbing, liquid heating, dual temperature piping, and many solar systems. K-FLEX LS is designed for the professional contractor.K-FLEX LS is recommended for applications ranging from -297˚F to 220˚F (-182˚C to 104˚C). The expanded closed cell structure makes K-FLEX LS an efficient insulator and an effective moisture vapor retarder. K-FLEX LS has a very tough skin which withstands tearing, rough handling, and severe environmental conditions, and yet is quite flexible for easy installation. K-FLEX LS has superior cold weather flexibility. K-FLEX LS Tube can be used with heat tracing/heat tapes.

INSTALLATION:
With a factory-applied coating of talc on the smooth inner surface, K-FLEX LS slides easily over pipe or tubing for quick installation. When applied to existing lines, tubing is slit lengthwise and fitted into place. (Slitting can be done on the job with a sharp knife or pre-slit K-FLEX LS is available on request.) All seams and butt joints should be sealed with an approved contact adhesive, making sure both surfaces to be joined are coated with adhesive. Fittings are fabricated from miter-cut tubular sections.

*NOTE: Pricing is for 3ft pieces, each unit is 3ft. Sizing: C = Copper Tube size and I = Iron Pipe Size

SEARCH BY CATEGORY

Rubber Tubing Insulation (1/2" Thick)