UPB Thermostat

The TU-16 Thermostat provides the latest technology in a full-featured universal thermostat with UPB powerline communications.

The TU-16 Thermostat provides the latest technology in a full-featured universal thermostat with UPB powerline communications. The TU-16 has separate heating and cooling setpoints. The display shows the setpoint of the current operating mode (in Auto mode, the system keeps track of the current operating mode of the last call, either heating or cooling). In addition to the universal Standard or Heat Pump HVAC systems support, the TU-16 has multistage heating/cooling system outputs. The control unit can support 2 stages of heating and cooling for Standard systems. It supports 3 stages of heating and 2 stages of cooling for Heat Pump systems. The TU-16 has a convenient setup mode from the Wall Display Unit. You can set the network Unit ID, F or C display mode and easily calibrate the internal and all attached remote sensors. The TU-16 has automatic detection and setup of remote temperature sensors. Remote sensors have address settings that, when detected by the TU-16, will be used for specific functions, such as, in lieu of the internal sensor, averaging with other sensors. NOTE: The TU-16 needs a SPIM-01 in order to operate in UPB mode. If you do not have a spare SPIM-01, order the TUK-16 Kit which includes a SPIM-01.