89mm(3.5") 4-Ply Silicone Coupler

4 Ply Polyester Silicone Hose

“High quality intercooler and intake hoses”

    The majority of all intercooler and intake systems are manufactured using mandrel bent pipe. Weather your pipes are made from steel, aluminum, stainless steel or titanium you will need to join these sections with a semi-flexible connection. Got Speed Racing’s 4 ply polyester hose and couplers fill that gap by providing a high quality affordable bridge between your connections.
Our intercooler hose is reinforced with 4-plies of woven polyester fabric and is manufactured with a standard wall thickness of .195”. This heavy wall construction is more than adequate for most of the intercoolers and intake applications. The limiting factor with this hose is the temperature range of –65º to 350ºF. Although our silicone intercooler hose is quite an improvement over the OEM rubber connections, the temperature range will max out around 350ºF. This limiting factor prohibits the use of this hose directly connected to your turbo, or in very close proximity to exhaust components.
As with our High Performance series silicone hose, manufacturing of the polyester reinforced intercooler hose starts off with 100% U.S. manufactured silicone bases that are specifically formulated to resist chemicals, ozone, cracking, peeling and elevated temperatures. Our hose is manufactured to meet SAE J20 R1 Class A. Each production lot has been burst tested per the spec and has been inspected for visual defects prior to being released from production.

Applications:
Primarily used on Intercoolers, intakes and cooling systems. Temp range –65ºF to 350ºF.
Turbo applications should use our high performance series hose.

Recommended clamp/s:
 Stainless Steel liner clamps
 Stainless Steel T-bolt clamps